# What Area Will 1 Ton Of Gravel Cover?

## How do you calculate gravel coverage?

Length in feet x Width in feet x Depth in feet (inches divided by 12).

Take the total and divide by 21.6 (the amount of cubic feet in a ton).

The final figure will be the estimated amount of tons required..

## What area will a 25kg bag of gravel cover?

For Decorative Gravel As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

## How many square feet does 1 ton of 57 gravel cover?

60 square feet#57 Gravel Coverage: Each ton covers approximately 60 square feet at 4″ deep, 80 square feet at 3″ deep, or 120 square feet at 2″ deep.

## How much will a dump truck load of gravel cover?

\$1 – \$3 Per Square Foot. The cost of gravel ranges from \$10 to \$50 per ton, \$15 to \$75 per yard, \$1 to \$3 per square foot, or \$1,350 per truck load depending on the rock type, volume, and travel distance. Delivery is included up to 10 miles.

## How much will a ton of gravel cover?

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

## How deep should I lay gravel?

What depth of gravel do I need? You would usually lay a 10mm aggregate at a depth of 30-40mm, but on a driveway this would need to be at least 50mm. A 20mm aggregate would need to be at least 40-50mm deep, and at least 50-60mm on driveways. A larger aggregate will settle and bond together better than smaller ones.