What Area Does 1 Ton Of Gravel Cover?

How do I measure how much gravel I need?

Measure the length and width of your driveway in feet.

Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot.

You now have the volume of gravel needed in cubic feet.

Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard..

How much will a dump truck load of gravel cover?

$1 – $3 Per Square Foot. The cost of gravel ranges from $10 to $50 per ton, $15 to $75 per yard, $1 to $3 per square foot, or $1,350 per truck load depending on the rock type, volume, and travel distance. Delivery is included up to 10 miles.

What area will a 25kg bag of gravel cover?

For Decorative Gravel As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

How deep should I lay gravel?

What depth of gravel do I need? You would usually lay a 10mm aggregate at a depth of 30-40mm, but on a driveway this would need to be at least 50mm. A 20mm aggregate would need to be at least 40-50mm deep, and at least 50-60mm on driveways.

How much gravel do I need for a circle?

Radius in feet x Radius in feet x Depth in feet (inches divided by 12) x pi (3.14). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of cubic yards required.

How much will a ton of gravel cover?

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

Should landscape fabric go under gravel?

For all that, weed cloth does have a use: under hardscape. It may be bad under bark dust, mulch, soil, or compost but it works very well under river rock, gravel, decomposed granite, or flagstone. … It certainly does help with weeds, but it also keep mud and aggregate separate during our wet winters!

How many square feet does 1 ton of 57 gravel cover?

Each ton covers approximately 60 square feet at 4″ deep, 80 square feet at 3″ deep, or 120 square feet at 2″ deep. #57 Gravel Color: In central Ohio, this stone is generally a grey to tan color.