# Question: How Much Pea Gravel Do I Need?

## How much does a 25kg bag of gravel cover?

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm..

## How much does a yard of pea gravel cover?

How much does a yard of pea gravel cover? A cubic yard of pea gravel will cover 324 square feet to a depth of one inch, equal to an 18-foot square.

## How many square feet does a ton of pea gravel cover?

60 square feetPea Gravel Coverage: Each ton covers approximately 60 square feet at 4″ deep, 80 square feet at 3″ deep, or 120 square feet at 2″ deep.

## How much will a ton of gravel cover?

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

## How much does a pea gravel patio cost?

At a cost of about \$5 a square foot, a pea gravel patio is easy on the budget (especially if you open the 50-pound bags and rake the gravel yourself)–and can be a surprisingly elegant hardscape element in the garden.

## How much gravel do I need calculator?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

## How deep should I lay gravel?

What depth of gravel do I need? You would usually lay a 10mm aggregate at a depth of 30-40mm, but on a driveway this would need to be at least 50mm. A 20mm aggregate would need to be at least 40-50mm deep, and at least 50-60mm on driveways.

## How many yards are in a ton of gravel?

A general rule of thumb when converting cubic yards of gravel to tons is to multiply the cubic area by 1.4. For your reference, gravel typically weighs 2,800 pounds per cubic yard. In addition, there are 2,000 pounds to a ton. For instance, if your area to be landscaped is 100 cubic yards, multiply that by 1.4.

## How many yards are in a ton of pea gravel?

Multiply your cubic yards by 1.3 to find the total number of tons you’ll need. (A single cubic yard of pea gravel weighs about 1.3 short tons.)

## Does pea gravel drain well?

Since it has a smooth finish, pea gravel is also regularly used for walkways, dog runs, playgrounds, patios, and a variety of other high-traffic areas. Like crushed stone, pea gravel can also be used for underground projects, such as drainage and pipe bedding.

## How many square feet does a 50 lb bag of gravel cover?

Consider a ½ cubic foot bag of stone or soil weighs about 50 lbs and will cover 2 square feet at 3″ deep.

## What area will 1 ton of gravel cover?

How many square meters does a ton of gravel cover? One tonne will cover 14 square metres. If you want to apply them in a normal depth 50 mm for a driveway. 1 tonne will be sufficient to cover approximately 20 square metres for pedestrian pathways, 35mm depth is normally sufficient for pedestrian pathway.

## How much is a dump truck full of gravel?

\$1 – \$3 Per Square Foot. The cost of gravel ranges from \$10 to \$50 per ton, \$15 to \$75 per yard, \$1 to \$3 per square foot, or \$1,350 per truck load depending on the rock type, volume, and travel distance. Delivery is included up to 10 miles. Gravel spreading costs \$12 per yard or \$46 per hour.

## What do you put under pea gravel?

Put down the base layer. Gravel composed of 3/4-inch crushed rock pieces mixed with rock dust works best. The crushed rock will add stability to the top layer of pea gravel.

## Which is cheaper pea gravel or mulch?

Pea gravel is generally more expensive than organic mulches and, because of its weight, it is more difficult to install. … Your soil may retain moisture better with pea gravel than with no mulch at all, but the rock is not effective in maintaining even soil temperatures.

## What is another name for pea gravel?

Pea gravel: also known as “pea shingle” is gravel that consists of small, rounded stones used in concrete surfaces.

## How many bags of pea gravel do I need?

A 50-pound bag of pea gravel is equivalent to 0.5 cubic foot, so two 50-pound bags cover 1 cubic foot.